The Investigation of precision of analytical methods for determination of salt content in Iranian crude oils
Volume1,Issue01,Pages23-28,Ar-AMC-33 *** Filed: Chemistry
Abstract
In crude oil analysis, the determination of salt content is one of the most important parameters especially for refining and exporting industries. In this study, extraction followed by volumetric titration and electrometric procedure are performed for determining salt content for several Iranian crude oils. Also, the effects of disturbing agents such as increasing associated water for determining salt in crude oil were investigated for both methods. The results show when water content in crude oil is less than 0.05 weight percent, both methods are equally accurate for determining salt content, but when there is an increase in associated water content in crude oil, the electrometric method followed by volumetric titration method shows more accurate results in comparison with the extraction procedure.
References
A. Kamari, A.Bahadori, and A.H.Mohammadi, On the Determination of Crude Oils Salt Content: Application of Robust Modeling Approaches, J. Taiwan Institute Chem. Eng., 44(2015)27-35.
A.A. Pasban, S. Sadeghpour, M. Masoumi, and A.A.Miran Beigi, Acidity removal of Iranian heavy crude oils by nanofluid demulsifier: An experimental investigation, NanoAnalysis, 04 (2017) 112-118.
E. Elhaddad and M.E. Abdel-Raouf, New Model to Eliminate Salts from Sarir Crude Oil: a Case Study, Int. J. Eng. Res. Sci. Technol., 2 (2013)182-189.
U.B. Deshannavar, M.S,Rafeen, M.Ramasamy, and D,Subbarao, Crude oil Fouling:A Review, J. Appl. Sci., 10 (2010) 3167-3174.
J.J. Sheng, Investigation of alkalineecrude oil reaction, Petroleum, 1 (2015) 31-39.
C. Soltelo, A.Favela-Contreras,D. Sotelo,F. Beltran-Carajal, E.Cruz, Control Structure Design for Crude Oil Quality Improvement in a Dehydration and Desalting Process, Arab. J. Sci. Eng., 43 (2018) 6579-6594.
H. Kiani, Study of a crude oil desalting plant of the national Iranian south oil company in Gachsaran by using artificial neural networks, Chem. Mol. Nucl. Mater. Metall. Eng., 7(12), (2013) 670–673.
H.K Abdel-Aal., M.Aggour,M.A.Fahim,Petroleum and gas field processing, ASTM International, CRC Press, Florida, 2015.
M.R Riazi-Aal., S.Eser, S.S. Agrawal, and J.L.Pena Diez, Petroleum refining and natural gas processing, 2nd ed., Taylor and francis, PA, USA, 2013.
W. Y. Ayele, G. Juell-Skielse, A. Hjalmarsson, P. Johannesson, method for designing and refining digital Innovation contest measurement model, An Int. J. Inform. Technol., 11 (2018 ) 25-53.
ASTM D4006, Standard test method for water content in crude oil by distillation, Annual Book of ASTM standards, 05.01, USA, 2017.
ASTM D4007, Standard test method for water and sediment in crude oil by centrifuge method, Annual Book of ASTM standards, 05.01, USA, 2017.
ASTM D4007, Standard test method for water content in crude oil by potentiometric Karl Fischer method, Annual Book of ASTM standards, 05.01, USA, 2017.
IP 77, Determination of salt content- extraction and volumetric method, 2015.
ASTM D3230, Standard test method for salts in crude oil (electrometric method) Annual Book of ASTM standards, USA, 05.01, 2017.
ASTM D6560, Standard test method for determination of asphaltenes (heptanes insoluble) in crude petroleum and petroleum products, Annual Book of ASTM standards, USA, 05.02, 2017.
ASTM D664, Standard test method for acid number of petroleum products by potentiometric titration, Annual Book of ASTM standards, USA, 05.01, 2017.

JOURNAL PUBLISHING AGREEMENT
PLEASE PROVIDE US THE FOLLOWING INFORMATION,
Article entitled:
Corresponding author:
To be published in the journal:
Your Status
I am the sole author of the manuscript
- I am an Iranian government employee.
- I am a European government employee
- I am a Asian government
- None of the above
I am one author signing on behalf of all co-authors of the manuscript
- I am an Iranian government employee.
- I am a European government employee
- I am a Asian government
- None of the above
Please tick the above blanks (as appropriate), review the Journal Publishing Agreement, and then sign and date the document in black ink.
Published Journal Article: the author may share a link to the formal publication through the relevant DOI. Additionally theses and dissertations which contain embedded Published Journal Articles as part of the formal submission may be hosted publicly by the awarding institution with a link to the formal publication through the relevant DOI. Any other sharing of Published Journal Articles is by agreement with the publisher only.
Signed: ______________________________________ Name printed: ___________________________________________
Title and Company (if employer representative): _______________________Date: __________________________________